8 GPM PRESSURE WASHER PLUMBING KIT, HOW TO PLUMB A PRESSURE WASHER, PLUMBING KIT, 1.5" ID SUCTION HOSE KIT, Y STRAINER, 1.5" HOSE BARBS
Click To Enlarge

8-10 GPM PRESSURE WASHER PLUMBING KIT WITH EVERYTHING NEEDED TO CORRECTLY PLUMB THE SUPPLY SIDE OF THE PUMP FROM THE TANK, UNLOADER BYPASS RETURN AS WELL AS THE HIGH PRESSURE DISCHARGE 

INCLUDED IN THE KIT ARE AS FOLLOWS:

1.5" 80 MESH Y-STRAINER

3 X SCH 80 GREY HOSE BARBS

3/4" X 1.5" BRASS HOSE BARB FOR THE PUMP

BULKHEAD OR CONNECTION FOR TOTE FOR BOTTOM OF TANK

10' NON-COLLAPSIBLE SUPPLY / SUCTION HOSE 

12' SPIRALITE YELLOW AG

BULKHEAD FOR BYPASS RETURN LINE FROM UNLOADER

BRASS HOSE BARB ELBOW FOR RETURN LINE

50' 1/2" ID HIGH PRESSURE HOSE

12' 1/2" ID HIGH PRESSURE JUMP HOSE TO REEL

6 X ALL STAINLESS STEEL HOSE CLAMPS. PLEASE INDICATE PRESSURE WASHER TANK TYPE CONNECTION IN NOTES OF ORDER. ARE YOU CONNECTING TO AN IBC SQUARE CAGE TYPE TOTE TANK OR A HORIZONTAL LEG TANK. PLEASE INDICATE THE DESIRED LENGTH IF YOUR HIGH PRESSURE JUMP HOSE AND HOSE ENDS. MOST GUYS USE A CHEMICAL INJECTOR BEFORE THE REEL AND REQUIRE A 3/8” MPT END BUT MAY WANT TO DIRECT CONNECT INTO THE OUTLET OF THE UNLOADER. WE CAN CRIMP BOTH 3/8” & 1/2” MPT AND FPT. A CUSTOM CRIMPED HOSE REALLY TIES YOUR RIG TOGETHER.

***WE HIGHLY RECOMMEND THAT YOU CHANGE OUT THE EXISTING 1/4" HOSE ON YOUR WHISPER WASH TO A 3/8" HIGH PRESSURE HOSE (PART # WWHOSE3/8 AND NOT INCLUDED IN THIS KIT)****

 

  • Item #: PLUMB-8
  • Manufacturer: PWP IN-HOUSE ASSEMBLY
  • Manufacturer's Product Number: PLUMB-8
  • Condition: New

8-10 GPM PRESSURE WASHER PLUMBING KIT W/ EVERYTHING NEEDED

Price: $335.00
* Marked fields are required.
Qty: *