CHLORINE FILTER SOFTWASH FILTER, SLOTTED FILTER,CHLORINE FILTER SOFTWASH FILTER, SLOTTED FILTER, SUCTION HOSE ASSEMBLY, SLOTTED PVC INLET FILTER
Click To Enlarge

THIS IS A NON-COLLAPSIBLE SUCTION HOSE FOR USE WITH A 12 VOLT PUMP, 1/2 AIR DIAPHRAGM PUMP OR ANY PUMP IN THESE RELATED INDUSTRIES.  THE INLET OF THE PUMP MUST BE 1/2" FPT.

12' LONG X 1/2" MPT CRIMPED ON A 1" INNER DIAMETER CLEAR AG HOSE W/ SLOTTED PVC FILTER.  INSTALLED WITH AN ELBOW FOR TOP DRAW FROM TANK AND TO ALLOW USER TO FIT THE SLOTTED FILTER END INTO THE BUNG OPENING OF A 55 GALLON DRUM.

YOU MUST FABRICATE AND PROVIDE THE PVC SLEEVE TO SLIP OVER HOSE TO KEEP FILTER AT BOTTOM OF TANK OUT OF 1 1/2" SCH 40 PVC.

DO NOT HARD PIPE PLUMB THIS FILTER INTO THE TANK.  YOU MUST BE ABLE TO REMOVE THE SLOTTED FILTER TO CLEAN THE DEBRIS AND SALTS FROM THE SURFACES.

***REX, THE PUMP GURU, INVENTED THIS SLOTTED FILTER FOR USE WITH SODIUM HYPOCHLORITE.***

FYI:

THE GENERAL RULE OF THUMB WHEN PLUMBING A PUMP IS AS FOLLOWS:

DOUBLE THE HOSE INNER DIAMETER IN COMPARISON TO THE PUMP INLET AND ALWAYS USE NON-COLLAPSIBLE HOSE

FOR EXAMPLE, THE DELAVAN 5850-101E HAS A 1/2" FNPT (FEMALE NATIONAL PIPE THREAD) PORT ON THE SUCTION SIDE OF THE PUMP.  WE RECOMMEND THAT YOU CHOOSE A 1" ID HOSE WITH A 1/2" CRIMPED ON HOSE BARB.  

  • Item #: AG16TF08-D
  • Manufacturer: PWP IN-HOUSE ASSEMBLY
  • Condition: New

SLOTTED FILTER SUCTION HOSE ASSEMBLY: 12 VOLT PUMP

Price: $45.00
* Marked fields are required.
Qty: *