Polypropylene Trigger Gun 1/2 FPT OR 15.0003.13

THIS POLYPRO TRIGGER GUN IS GREAT FOR THE PERSON THAT IS VERY GENTLE ON EQUIPMENT.  THIS GUN MUST BE RINSED AFTER EVERY USE AND CAN'T HANDLE BEING DROPPED WITH A WAND INSTALLED ON THE OUTLET.  WE RECOMMEND INSTALLING A 1/2" PVC WAND NO LONGER THAN 24" BECAUSE INSTALLING A LONGER LENGTH WILL PLACE STRESS ON THE OUTLET PORT AND POSSIBLY CAUSE A CRACK.  DO NOT USE TEFLON TAPE TO INSTALL FITTINGS ON THIS GUN.  PLEASE USE NON-DRYING LIQUID TEFLON SUCH AS RECTORSEAL T PLUS 2 AVAILABLE AT JUST ABOUT ANY LOCAL HARDWARE STORE IN THE PLUMBING SECTION.

18 GPM MAXIMUM

400 PSI MAXIMUM

1/2" FPT IN AND OUT