2 TANK SUCTION HOSE KIT W/ 3 WAY BANJO BALL VALVE SS BRACKETS
Click To Enlarge

THIS KIT WILL WORK FOR 1/2" PORTED PUMPS SUCH AS THE 1/2" ALL-FLO, DELAVAN, FB2, 1/2" YAMADA, 1/2" ARO PUMPS, 1/2" EVERFLO, ETC.

THE 2 TANK SUCTION HOSE KIT INCLUDES THE FOLLOWING:

3 WAY POLYPROPYLENE BANJO BALL VALVE WITH STAINLESS STEEL MOUNTING BRACKETS

TWO 1" ID NON-COLLAPSIBLE SUCTION HOSE ASSEMBLIES 12 FEET LONG WITH 1" MPT CRIMPED ON THE END INSTALLED INTO THE 3 WAY BALL VALVE

TWO ORIGINAL SLOTTED PVC FILTERS

TWO HOSE BARBS FOR THE SLOTTED PVC FILTERS

ONE  MINIMUM OF 18" OR LONGER 1" NON-COLLAPSIBLE SUCTION HOSE ASSEMBLY CRIMPED ON BOTH ENDS WITH SCH 80 PVC.

THIS ASSEMBLY IS COMPRISED OF AN ELBOW FOR TOP DRAW FROM TANK AND TO ALLOW THE USER TO FIT THE SLOTTED FILTER END INTO A 55 GALLON DRUM OPENING.

YOU MUST FABRICATE AND PROVIDE THE PVC SLEEVES TO SLIP OVER THE HOSES TO THE KEEP FILTERS AT BOTTOM OF TANKS.  THIS ASSEMBLY REQUIRES A LENGTH 1 1/4" OR 1 1/2" SCH 40 PVC PIPE.

DO NOT HARD PIPE PLUMB THIS FILTER.  MUST BE ABLE TO REMOVE FILTER FOR CLEANING.

***REX, THE PUMP GURU, INVENTED THIS SLOTTED FILTER FOR USE WITH SODIUM HYPOCHLORITE.***

FYI:

THE GENERAL RULE OF THUMB WHEN PLUMBING A PUMP IS AS FOLLOWS:

DOUBLE THE HOSE INNER DIAMETER IN COMPARISON TO THE PUMP INLET AND ALWAYS USE NON-COLLAPSIBLE HOSE

ACCORDING TO ALL-FLO'S  PRINTED LITERATURE, THEY RECOMMEND THAT USERS TRIPLE THE NON-COLLAPSIBLE HOSE ID AND KEEP THE HOSES AS SHORT AS POSSIBLE.

FOR EXAMPLE, THE DELAVAN 5850-201E HAS A 1/2" FNPT (FEMALE NATIONAL PIPE THREAD) PORT ON THE SUCTION SIDE OF THE PUMP.  WE RECOMMEND THAT YOU CHOOSE A 1" ID HOSE WITH A 1/2" CRIMPED ON HOSE BARB.  

  • Item #: BV1616
  • Manufacturer: PWP IN-HOUSE ASSEMBLY
  • Condition: New

2 TANK SUCTION HOSE KIT W/ 3 WAY BANJO BALL VALVE SS BRACKETS

Price: $227.90
* Marked fields are required.
Qty: *