8 GPM JROD ASSEMBLY HIGH LOW SOAP RINSE 20 50 ORIFICES, 6540-8, 8 GPM JROD
Click To Enlarge

JROD 4 WAY STAINLESS STEEL NOZZLE HOLDER WITH A 0050, 2550, 0015, 2520 OR ANY NOZZLE IN THAT RANGE FOR YOUR 8 GPM PRESSURE WASHER

If you do not prefer the 25 degree spray pattern to rinse low or apply soap, simply state your preference for a different spray pattern in the checkout notes. 

We strongly suggest adding a SN8 to this purchase.  You can remove any of the nozzles and replace it with the Kyle Davis long range nozzle and gain some serious distance.  

We are happy to exchange a different spray pattern for the same price.  Some guys prefer the 25 orifice on the smaller side.  We carry those too.  if you prefer the 25, let us know.  These WILL NOT arrive installed. 

Please use medium or blue liquid threadlock to prevent cracking the JROD or Quadbanger.  

Simply quick connect the JROD to your single lance.  Insert the plug you wish to use.  

If you do not need all four nozzles or need to carry three nozzles, try our Tribanger or NHTB.

When trying to size nozzles appropriately for less gallons per minute, drop down several nozzle orifices from the nozzles listed above.  Should you need assistance with choosing the nozzles, call or email us.  We are happy to help you save time and money by choosing the correct nozzle for the job.

These are a best guess for both direct drive and belt driven 8 gpm 3500 or 3000 psi pressure washers.  You should reach more than three stories with the 0020 nozzle but not apply soap when your downstream injector is inline.  The 0050 will allow you to generously apply soap several stories.  The 2520 should allow you to rinse without much pressure or softwash pressure wash.  The 2550 will allow you to apply a generous amount of soap using your downsteam injector or use it to rinse by removing your injector.  The 2520 or 2525 is a good nozzle to move sand.  Of course, if you still pull chemical and do not want to pull chemical, remove the injector.

According to the nozzle calculator for the 8 gpm @ 3500 psi unit, using a 20 orifice will drop your pressure to 640 psi if using 8 gpm and a 50 orifice will drop your pressure to 102 psi.


  • Item #: 6540-8
  • Manufacturer: PWP IN-HOUSE ASSEMBLY
  • Manufacturer's Product Number: 6540-8
  • Condition: New

8 GPM JROD ASSEMBLY HIGH LOW SOAP RINSE 20 50 ORIFICES

Price: $42.50
* Marked fields are required.
Qty: *