WHISPER WASH MONDO, MONDO FORCE, 48" WHISPER WASH, 48" WHIRL A WAY, MONDO FORCE 500, WHISPER WASH MONDO FORCE 48" SURFACE CLEANER, 10 GPM SURFACE WASHER, 10 GPM SURFACE CLEANER, M-500
Click To Enlarge

WHISPER WASH MONDO FORCE 48" M-500 SURFACE CLEANER WITH TWO SPRAY BARS

THIS IS THE LONG AWAITED WHISPER WASH MONDO FORCE 48" SURFACE CLEANER.  WHISPER WASH IS ONE OF THE BEST COMPANIES TO WORK WITH AS FAR AS CUSTOMER SERVICE AND WARRANTIES ARE CONCERNED.  THIS IS A MONSTER SURFACE CLEANING, SIDEWALK-DIRT-EATING MACHINE!

PLEASE PURCHASE THIS MONDO FORCE 48" SURFACE CLEANER IF YOU HAVE 10 GPM AND UP.  IF YOU PAIR THIS UNIT WITH LESS GALLONS PER MINUTE, YOU WILL MOVE SLOWLY AND TIGER STRIPE IF YOU TRY TO PUSH IT FASTER.

OPERATING PARAMETERS: 2,000 to 4,000 PSI                      

2500 MAMIMUM RPM

GALLONS PER MINUTE (GPM): 6 TO 12 MODIFIED UP TO 20 GPM  

THE LESS GPM USED TO OPERATE THIS UNIT, THE SLOWER THE UNIT WILL MOVE.   WE DON'T WANT A DISAPPOINTMENT IN THIS PURCHASE.  YOU SHOULD BE AN INFORMED AND EDUCATED PRESSURE WASHER.                                  

DIMENSIONS OF THE MONDO: 80” x 49.5” x 12”

212º F MAXIMUM TEMPERATURE                                                              

OPERATING WEIGHT: 46 LBS  

PLEASE MESSAGE US IN THE NOTES OF THE ORDER LISTING: YOUR GALLONS PER MINUTE AND PRESSURE SO THAT WE MAY SEND ALONG THE CORRECT NOZZLES FOR THIS MONDO FORCE 48" SURFACE CLEANER.  THIS UNIT WILL ARRIVE WITH 25 DEGREE 2.00 1/4" MEG NOZZLES UNLESS OTHEWISE NOTED

ENSURE THAT YOUR PRESSURE WASHERS ARE ADEQUATELY PLUMBED WITH NON-COLLAPSIBLE SUCTION HOSE THAT IS DOUBLE THE INNER DIAMETER COMPARED TO YOUR PUMP INLET.  FOR EXAMPLE, A PUMP WITH A 1" INLET WOULD NEED A 2" ID NON-COLLAPSIBLE SUCTION HOSE WITH A 2" 80 MESH Y-STRAINER.  THESE SURFACE CLEANERS NEED A GENEROUS AMOUNT OF WATER FOR BEST RESULTS CLEANING.

THANK YOU ROB, FROM RIPTDE PRESSURE WASHING, FOR SHARING THESE PICTURES OF HIS NEW WHISPER WASH MONDO FORCE 48" SURFACE CLEANER.  ROB HAS TWO MONDO'S AND SEVERAL MAXIMA'S IN HIS FLEET OF WHISPER WASH PRODUCTS.

 

IT IS CRITICAL THAT YOUR 8 GPM AND HIGHER PRESSURE WASHER IS PLUMBED USING 1 1/2" SUCTION HOSE AND 1/2" JUMP HOSE TO THE REEL AND A 1/2" 50' HIGH PRESSURE HOSE FOR THE FIRST LENGTH ON THE REEL.  WE HAVE KITS AVAILABLE FOR YOU TO EASILY UPSIZE YOUR PLUMBING.  ALL OF THE HOSE AND FITTINGS ARRIVE IN ONE BOX.  YOU NEED TO SUPPLY A HEAT GUN, LITTLE BIT OF SOAP, LIQUID TEFLON SUCH AS RECTORSEAL T PLUS 2, TOOLS FOR TIGHTENING THE BARBS AND INSTALLING THE HOSE FITTINGS AND WATER TO RUN THE EQUIPMENT.  YOUR PUMP/UNLOADER AND ENGINE WILL RUN COOLER AND RUN UNDER LESS STRESS, LAST LONGER, SHOOT FARTHER USING YOUR GUN/WAND AND SURFACE CLEAN FASTER.  YOU WILL GO HOME FASTER OR ON TO THE NEXT JOB FASTER THAN PLUMBING YOUR PUMP USING THE 1" HOSE.  YOUR OVERALL COSTS WILL GO DOWN AND PROFIT MARGIN WILL INCREASE.

 

THE KITS ARE AVAILABLE FOR TOTE CONNECTIONS:  PL-8-TO 

 

HORIZONTAL LEG TANK CONNECTIONS: PL-8-TA

WARRANTY FROM WHISPER WASH

One Year Limited Warranty

This machine is warranted by the manufacturer to be free from defects in workmanship and materials under normal use. The manufacturer’s obligation under this warranty shall be limited to the repair or exchange of any part or parts that may prove defective in normal use within one year from date of purchase. In no event shall the manufacturer be liable for incidental nor consequential damages nor labor charges which shall result from any defect in the product or breach of this warranty. This warranty shall not apply to any part or parts which have been subject to accident, negligence, alteration, abuse or misuse. If any defect appears, immediately contact the dealer from which the unit was purchased. Returned units must be shipped to manufacturer prepaid only.  A dated sales receipt with the serial number is required for all warranty claims.

 

 

 

  • Item #: WWMONDO48
  • Manufacturer: WHISPER WASH
  • Manufacturer's Product Number: MONDO FORCE 48" M-500
  • Condition: New

MONDO FORCE 48" SURFACE CLEANER M-500 BY WHISPER WASH

Price: $1,675.00
* Marked fields are required.
Qty: *