28" WHISPER WASH BIG GUY SURFACE CLEANER WHISPER WASH BIG GUY 2 TIP BAR &3/8" HOSE SURFACE CLEANER
Click To Enlarge

WHISPER WASH BIG GUY 28" COVER HANDLE 44" WITH 10" PNEUMATIC TIRES AND (1) 4" CASTER (2) 25025 NOZZLES STANDARD

PWP RECOMMENDS PAIRING THIS WHISPER WASH 28" BIG GUY WITH A MINIMUM OF 8 GPM AND LARGER PRESSURE WASHER.  WE RECOMMEND REQUESTING IN YOUR ORDER NOTES TWO (2) 4.5 ORIFICE BY 25 DEGREE SPRAY NOZZLES WHEN USING 8 GPM @ 3500 PSI.  USING NOZZLES THAT ARE TOO SMALL WILL DAMAGE YOUR PRESSURE WASHER.

DID YOU KNOW THAT YOU CAN CUSTOMIZE WHISPER WASH SURFACE CLEANERS?  WHISPER WASH WILL BUILD A UNIT FOR YOU OFTEN TIMES FOR THE SAME COST OR MINIMAL INCREASE.  FOR EXAMPLE, IF YOU DO NOT LIKE THE AXLE, YOU CAN ORDER THIS UNIT WITH FOUR (4) GREY NON-MARKING CASTERS OR WITH THE CLASSIC STYLE HANDLE.  YOU CAN ORDER NO FLAT TIRES OR A FOUR TIP SPRAY BAR.  

USERS OF THE BIG GUY REPORT THAT THEY CAN STEER THIS SURFACE CLEANER WITH TWO FINGERS.  THE AXLE DESIGN IS BEST FOR FORWARD AND BACKWARD MOVEMENT INSTEAD OF SIDE TO SIDE OR CIRCLULAR.  

WE RECOMMEND USING 8 GPM AND LARGER PRESSURE WASHERS WITH THIS UNIT BECAUSE THE UNIT WILL MOVE TOO SLOWLY TO CLEAN AND MAY LEAVE 'TIGER STRIPES'.  CONSIDER THE 19" CLASSIC, THE 24" GROUND FORCE OR 24" LIL BIG GUY TO MOVE EVEN FASTER FOR 4 GPM TO 8 GPM OR GREATER.

IT IS CRITICAL THAT YOUR 8 GPM AND HIGHER PRESSURE WASHER IS PLUMBED USING 1 1/2" SUCTION HOSE AND 1/2" JUMP HOSE TO THE REEL AND A 1/2" 50' HIGH PRESSURE HOSE FOR THE FIRST LENGTH ON THE REEL.  WE HAVE KITS AVAILABLE FOR YOU TO EASILY UPSIZE YOUR PLUMBING.  ALL OF THE HOSE AND FITTINGS ARRIVE IN ONE BOX.  YOU NEED TO SUPPLY A HEAT GUN, LITTLE BIT OF SOAP, LIQUID TEFLON SUCH AS RECTORSEAL T PLUS 2, TOOLS FOR TIGHTENING THE BARBS AND INSTALLING THE HOSE FITTINGS AND WATER TO RUN THE EQUIPMENT.  YOUR PUMP/UNLOADER AND ENGINE WILL RUN COOLER AND RUN UNDER LESS STRESS, LAST LONGER, SHOOT FARTHER USING YOUR GUN/WAND AND SURFACE CLEAN FASTER.  YOU WILL GO HOME FASTER OR ON TO THE NEXT JOB FASTER THAN PLUMBING YOUR PUMP USING THE 1" HOSE.  YOUR OVERALL COSTS WILL GO DOWN AND PROFIT MARGIN WILL INCREASE.

 

THE KITS ARE AVAILABLE FOR TOTE CONNECTIONS:  PL-8-TO 

 

HORIZONTAL LEG TANK CONNECTIONS: PL-8-TA


  • Item #: WW5698-2
  • Manufacturer: WHISPER WASH
  • Manufacturer's Product Number: BIG GUY
  • Condition: New

WHISPER WASH BIG GUY 2 TIP BAR &3/8" HOSE SURFACE CLEANER

Price: $735.00
* Marked fields are required.
Qty: *