3/8" 9 GPM All-Flo Softwash Kit: 200' 5/8" ID Yellow Flex Tech RT, Regulator, JROD
This All-Flo soft wash system starts up kit includes the following:
- 3/8" Kynar body with Santoprene diaphragms 'Top of the Line and Best Air Diaphragm Pump in the World', model C038-SQK-SSKE-S70.
- 200' of 5/8" ID Yellow Flex Tech RT hose with 316 stainless steels crimped on hose ends (No hose clamps).
- Polywire suction hose assembly with the original slotted PVC suction filter for sodium hypochlorite and softwash chemicals.
- Special high quality SCH 80 PVC ball valve assembly to withstand daily use of sodium hypochlorite.
- JROD nozzle holder with long range and fan pattern nozzles.
- Special air regulator/filter with set of high-quality brass air couplers and plugs (Set this regulator to 80 psi maximum: Arrow points to pump. Install the desiccant filter (purchased online motor guard m-45, anywhere) between the regulator and the pump using a hex nipple or another length of air hose).
- 10-12 ft length of high quality, durable air hose assembly with crimped on hose ends (longer and shorter lengths available).
- Two spare stainless-steel couplers.
- 3/8" MPT x 1/2" FPT male adapter.
***All fittings should be installed using non-drying liquid Teflon such as Rector Seal T Plus 2 (Can be purchased at any hardware store in the plumbing section) Never use Teflon tape on anything in these related industries.***
We strongly suggest adding a 4318S Titan hose reel, a 2354 street 45 and a matching jump hose to this order. You can order a custom length jump hose by adding the FTY10 by the foot and adding two CSS ends to the cart.
The minimum 5.5 HP gas powered air compressor, PVC SCH 40 1.25" ID pipe sleeve for the suction hose assembly and tank are not included and should be purchased locally to save you money on shipping.
Check out the installations on YouTube channel: Rex, the Pump Guru
https://www.youtube.com/user/roofcleaningequip
Because the inlet port of the pump is 3/8", the general rule of pump plumbing indicates that the inner diameter of the supply line should be twice the inner diameter of the port and will require a minimum of a 3/4" ID hose. The 3/4" suction hose should not collapse and should remain somewhat rigid but allow flexibility under pulsation.
SKU: A9Y10B2