Plumbing Fittings

1/2" MPT x 1/4" FPT black polypropylene reducing bushing for your softwash gun or 1/2" ball valve applicator Condition : New   SKU: RB08-04

       1/2" FPT polypropylene bulkhead for tank pipe thread connection. This fitting is most often used near the top of the tank for the unloader b...

SCH 80 PVC 1.5" hose barb x 1.5" MPT male pipe thread heavy duty.         This SCH 80 PVC hose barb is used commonly on the supply or suction side ...

SCH 80 PVC 1" hose barb x 1" MPT male pipe thread heavy duty       This SCH 80 PVC hose barb is used commonly on the supply or suction side of a 3...

       SCH 80 PVC 1/2" hose barb x 1/2" MPT male pipe thread heavy duty. This SCH 80 PVC hose barb is used commonly on the discharge side of a low ...

SCH 80 PVC 3/4" hose barb x 1/2" MPT male pipe thread heavy dutyCondition : New SKU: HB1208PVC

1.5" Bulkhead Banjo FPT Polypropylene For 1.5” FPT Tank Pipe Thread Connection   SKU: BH24

SCH 80 PVC 1” hose barb x 1” MPT male pipe thread elbow / 90 heavy duty     This Sch 80 PVC hose barb is used commonly on the supply or suction si...

SCH 80 PVC 3/4" hose barb x 3/4" MPT male pipe thread heavy duty SKU: HB1212.PVC  

Camlock tote connection to plumb your pressure washer. Do not use a rubber boot. Install this part and install the RB32-16 for 1" hose or a RB32-24...

2" MPT x 1 1/2" FPT SCH 80 PVC reducing bushing for use at tote. You will need to install this fitting into a camlock at your tote or purchase a ki...

3/4" FPT polypropylene bulkhead for tank pipe thread connection   SKU: 4489

      1" FPT polypropylene bulkhead for tank pipe thread connection this is commonly used on the inlet of the Hudson or a pressure washer supply ta...

SCH 80 PVC 1" hose barb x 1/2" MPT male pipe thread heavy duty      This SCH 80 PVC hose barb is used commonly on the supply or suction side of a ...

SCH 80 PVC 1/2" hose barb x 1/2" MPT male pipe thread heavy duty elbow. This Sch 80 PVC hose barb is used commonly on the discharge side of a low p...

2" SCH 80 PVC threaded Tee   SKU: TEE32

SCH 80 PVC 1.5" hose barb x 1.5” MPT male pipe thread elbow        This SCH 80 PVC hose barb is used commonly on the supply or suction side of an 8...

2" FPT threaded coupler for tote connection to plumb your pressure washer Do not use a rubber boot. Install this part first and install the RB32-16...

2" MPT x 1" FPT SCH 80 PVC reducing bushing for use at tote. You will need to install this fitting into the Camlock at your tote or purchase a kit....

Stainless steel 1" hose barb x 1/2" MPT male pipe thread heavy duty.          This is a hard to find hose barb. We carry this barb in brass, stain...

3/4" Hose Barb X 1/2" MPT Elbow SCH 80 PVC.   SKU: HB1208.90

2" Banjo FPT poly bulkhead for tank pipe thread connection or drain from tank   SKU: BH32

SCH 80 PVC 1.5" hose barb x 1" MPT male pipe thread heavy duty. Use this barb on the inlet of the 1" All-Flo flange kit. SKU: HB2416P

3/4" mpt x 1/4" fpt Black polypropylene reducing bushing for your softwash 3/4" ball valve applicator   SKU: RB12-04