JE Adams 2-3 gpm 1.8mm 20% Adjustable Acid Injector
JE Adams 2-3 gpm 1.8mm 20% Adjustable Acid Injector
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a large orifice nozzle such as a 35 or 40 orifice 1/4 meg nozzle (3626), dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a Venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
- Draw rate 0 to 20%
- Ceramic ball for injecting acids
- Operating pressure: 3000 psi.
- Minimum 35% pressure drop for draw.
- Maximum temperature: 194 degrees f.
- Inlet: 3/8" mpt.
- Outlet: 3/8" mpt.
- Repair kit: #1966.
We strongly recommend removing the chemical injector when not in use to allow for best flow.
SKU: 1958
