5.5 gpm 60 psi EF5500 EverFlo 12 Volt Softwash Roof Wash Pump
Do not use Teflon tape on this pump. No warranty on this pump. 8 gauge wire must be used. No alligator clips used with this pump. Use a minimum 875 CCA deep cycle marine battery.
Tested at the factory and will have water in them
The Everflo EF5500 offers 5.5 gallons per minute at 60 psi powered by a deep cycle marine battery. We recommend using 8-gauge wire, a 30-amp waterproof switch and extra fuses in the waterproof fuse holder. This pump will perform at maximum efficiency using 200' of 5/8" chemical hose such as our red, blue, or yellow 5/8" Flex Tech RT (best quality and less temperature responsive) or the red or blue Kuri Tec hose, 0040, 1550 and 2550 nozzles installed in a JROD connected to a BV08RB.80. Use our 1" non-collapsible suction hose assembly with the original slotted PVC inlet filter for sodium hypochlorite (AG16TF08-D) installed on the end to prevent trash from entering the pump. Do not use a stainless steel mesh filter or a filter with a fine nylon mesh covering pipe if using this pump for soft washing or with corrosive chemicals.
This (EF5500) is a stand-alone pump item. The kits we offer includes some of the other components.
- Polypropylene pump housing and valve plate
- Viton® valves – santoprene® diaphragm
- Zinc plated steel fasteners
- Painted steel 3” motor shell
- Honeywell™ micro switch™
- 60 psi (4.1 bar) max
- 5.5 GPM (20.8 lpm) max
- Round-up® ready
- Self-priming to 8 feet
- Max fluid temp 140 deg f
- 12v dc
- 17 max amps
- 1/2” npt ports
- Ce approved*
- 5.6 lbs dry
- Inline fuse protection
Tested at the factory and will have water in them.
Do not use Teflon tape on this pump. No warranty on this pump. 8 gauge wire must be used. No alligator clips used with this pump. Use a minimum 875 cca deep cycle marine battery.
SKU: EF5500
