Skip to content
8 gpm 4000 psi Alkota 8405 iGX800EFI Hot Skid Pressure Washer
SKU PW.8405HNLEI

8 gpm 4000 psi Alkota 8405 iGX800EFI Hot Skid Pressure Washer

by ALKOTA
Save $1,001.00 Save $1,001.00
$9,500.00
$9,500.00 - $9,500.00
$9,500.00
$8,499.00
$8,499.00 - $8,499.00
$8,499.00

Alkota Slim Line Hot Skid Pressure Washer 8 GPM 4000 psi

8405 Model

22 1/4" W x 47 1/2" L x 41 1/8 H

Must inspect belts after 30 days. No warranty on belts. Unloader settings, clogged nozzles and loose belts are some causes of belt failure.

Did you know that you lose a minimum of 300 psi every 100' of 3/8" ID high pressure hose when using 8 GPM? Add the hose reel, any extra fittings under pressure, the gun/wand, and quick connects and you are down quite a bit of pressure.

We strongly recommend that you purchase our PL-8-TO or PL-8-TA kit which has everything you need to correctly plumb this unit. We recommend switching out the 1" barb to 1.5", upsizing the non-collapsible suction hose to 1.5" ID, upsizing the filter to 80 mesh 1.5", installing a 1.5" bulkhead, and upsizing to a 1/2" bypass hose to the tank using yellow ag, brass hose barb and 1/2" bulkhead. Increase the jump hose to the reel to a 1/2" high-pressure hose and use a 50' hose as the first length of hose on the reel. (Always strip all hose from the reel when in use.) Upsizing the hose IDs will allow you to shoot farther, increase the cleaning units and efficiency on your pressure washer as well, and move much faster when using your surface cleaner. 

Upsizing your hoses will prevent back-pressure to your tank, help your valves and high-pressure seals last longer, prevent your safety relief valve from spraying, and supply enough water to your pump using the 'double your supply hose ID in relation to your inlet port' plumbing rule of thumb and keep your pump cooler leading to less downtime. Double check your surface cleaner hose to ensure that it is 3/8" ID instead of 1/4". Always use medium threadlock on your high- pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles. 

If using a chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold.

Electronic fuel injection 

18" coil with stainless steel wrapper

Onboard 7-gallon fuel tanks

The new IGX800 Honda V-twin engine offers higher horsepower, quiet operation, and greater fuel efficiency with a three-year warranty.

Yes, this unit is a key start and not a pull start.

Includes 12-volt battery and marine battery box.

Hour meter

Racor fuel filter

SDS - soft dampening system for the long life of the coil (accumulator) 

Built on an end frame. 

Belt-driven TSF2021 General Pump

Pressure trapped blue spring EZ start unloader:  Never adjust the unloader.

Standard accessories are included below: 

  • Gun/wand assembly with insulated grip and quick connects.
  • 50’ 1/2" ID high-pressure hose w/quick connects.
  • Chemical injector assembly w/quick connects.
  • 1 yellow color-coded QC spray nozzle
  • 1 color-coded QC chemical nozzle 

Note: All units are completely factory assembled, tested in the USA, and delivered ready to operate 

 7481130

 SKU: PW.8405HNLEI

 

Secure Checkout Badge
Dedicated Support

We offer chat support during store hours

Call Us Anytime

+1 (727) 562-5488

Wide Product Selection

Find The Right Tool For Every Job

Fast and Reliable Shipping

Timely Delivery to Your Doorstep

Testimonials

I recently purchased a pressure washer from Pressure Washer Products, and the experience was fantastic from start to finish! The staff is incredibly knowledgeable and helped me find the perfect model for my needs. They answered all my questions and even gave me tips on maintenance and usage. The quality of their products is top-notch.. Highly recommended!

Kerolos Mamdoh

The best pressure washing store hands down. Rex the owner and his team have a wealth of knowledge about the industry. Lori is always there to help you with what you need. I’ve saved alot of money over the years through them because they help to educate you on what products and equipment are best to buy for your specific set up/washing goals. Other places attempt to drain your bank account if you let them. Not here, that’s why they have customers for life

Jared Policandriotes

I recently bought a surface cleaner from PWP, and it's been a game-changer. Lori helped me find the right tips for my machine, and the results have been fantastic. Thanks, Lori!

Sheriff Khalifa

Lori was very helpful and got us out surface cleaner and recommended what tips to match our machine. Runs fantastic. She also recommended a chemical injector to try on our trailer and it has been another great upgrade. Lori knows her stuff and the price and shipping was reasonable!

Brent Batton

I am a new customer to this business and have been here three times. Each time I have received fantastic customer service. I am glad there is actually a local business around that deals specifically with pressure washers. Highly recommended.

Doug Williams

I love this store. Laurie and Rex/ Family have been a huge help in understanding aspects of the equipment and tools we use in this industry. I’ve learned lots from them. Also the pricing and amount of supplies the store has to offer is perfect for a quick trip to load up and head out.

JR Pressure Wash Service

Search

Use this section to help customers find the products they're looking for.