Plumbing Fittings

This is an original slotted PVC filter approximately 1" x 8 - 12" long with a 1/4" poly hose barb. This original slotted PVC filter is suitable fo...

       This is an original slotted PVC filter approximately 1" x 8-12" long.  A 1/2" SCH 80 hose barb is included with the purchase. This filter i...

       This is an original slotted PVC filter approximately 1" x 8"-12" long.  A 3/4" SCH 80 hose barb is included with the purchase. This origina...

       This is an original slotted PVC filter approximately 1" x  8-12" long with a 1" SCH 80 PVC hose barb.        This original slotted PVC filt...

SCH 80 PVC 1.5" hose barb x 1.5" MPT male pipe thread heavy duty.         This SCH 80 PVC hose barb is used commonly on the supply or suction side ...

       1/2" FPT polypropylene bulkhead for tank pipe thread connection. This fitting is most often used near the top of the tank for the unloader b...

1/2" MPT x 1/4" FPT black polypropylene reducing bushing for your softwash gun or 1/2" ball valve applicator Condition : New   SKU: RB08-04

SCH 80 PVC 1" hose barb x 1" MPT male pipe thread heavy duty       This SCH 80 PVC hose barb is used commonly on the supply or suction side of a 3...

1.5" Bulkhead Banjo FPT Polypropylene For 1.5” FPT Tank Pipe Thread Connection   SKU: BH24

1/4 Hose Barb x 1/2" MPT for Chemical Injector Slotted Filter Black Polypropylene   SKU: HB0408

      1" FPT polypropylene bulkhead for tank pipe thread connection this is commonly used on the inlet of the Hudson or a pressure washer supply ta...

SCH 80 PVC 1.5" hose barb x 1.5” MPT male pipe thread elbow        This SCH 80 PVC hose barb is used commonly on the supply or suction side of an 8...

SCH 80 PVC 1” hose barb x 1” MPT male pipe thread elbow / 90 heavy duty     This Sch 80 PVC hose barb is used commonly on the supply or suction si...

       SCH 80 PVC 1/2" hose barb x 1/2" MPT male pipe thread heavy duty. This SCH 80 PVC hose barb is used commonly on the discharge side of a low ...

SCH 80 PVC 1" hose barb x 1/2" MPT male pipe thread heavy duty      This SCH 80 PVC hose barb is used commonly on the supply or suction side of a ...

SCH 80 PVC 3/4" hose barb x 1/2" MPT male pipe thread heavy dutyCondition : New SKU: HB1208PVC

SCH 80 PVC 3/4" hose barb x 3/4" MPT male pipe thread elbow heavy duty   SKU: HB1212.90

2" MPT x 1 1/2" FPT SCH 80 PVC reducing bushing for use at tote. You will need to install this fitting into a camlock at your tote or purchase a ki...

1/2"FPT X 1/2” FPT 45 degree coupler SCH 80 PVC for soft wash wand Add the RB08-04 to your cart to allow you to install the male coupler (4629). Co...

Camlock tote connection to plumb your pressure washer.  Do not use a rubber boot. Install this part and install the RB32-16 for 1" hose or a RB32-2...

SCH 80 PVC 3/4" hose barb x 3/4" MPT male pipe thread heavy duty SKU: HB1212.PVC  

SCH 80 PVC 1/2" hose barb x 1/2" MPT male pipe thread heavy duty elbow. This SCH 80 PVC hose barb is used commonly on the discharge side of a low p...

2" MPT x 1" FPT SCH 80 PVC reducing bushing for use at tote. You will need to install this fitting into the Camlock at your tote or purchase a kit....