Plumbing Fittings

3/4" FGH solid x 1/2" MPT fitting for water hose reel. We do not recommend a swivel fitting because it will leak.   SKU: 3252

1/4" FPT Brass Hex Coupler Low Pressure Use The 1/4 Meg nozzles such as the 6510 and 6505 install into this coupler.   SKU: 2129

Steel Hex Nipple 3/8" MPT x 3/8" MPT, 5000 psi Used to install the unloader on your pump outlet or to an unloader block (SKU# 6318). Condition : Ne...

Steel Male Adapter 1/2" FPT x 3/8" MPT, 5000 psi SKU: 2580

3/4" FGH solid x 3/4" MPT fitting for water hose reel.   SKU: 3253

1/4 Hose Barb x 1/2" MPT for Chemical Injector Slotted Filter Black Polypropylene   SKU: HB0408

5/8" Hose Barb x 1/2" MPT 316 Stainless Steel        This is a high grade 316 stainless steel hose barb. We use these on our chemical application ...

Brass bushing 1" MPT x 3/4" FPT   SKU: 4573

SCH 80 PVC 1” hose barb x 1” MPT male pipe thread elbow / 90 heavy duty     This Sch 80 PVC hose barb is used commonly on the supply or suction si...

1/2" MPT x 3/8" FNPT Swivel Street 45 Elbow Steel for High Pressure Use   We highly recommend this 1/2" x 3/8" Swivel 45 degree high pressure stre...

      1" FPT polypropylene bulkhead for tank pipe thread connection this is commonly used on the inlet of the Hudson or a pressure washer supply ta...

SCH 80 PVC 1.5" hose barb x 1.5” MPT male pipe thread elbow        This SCH 80 PVC hose barb is used commonly on the supply or suction side of an 8...

3/8" hose barb x 1/2" MPT elbow brass often used for hose bypass at the 1/2" bulkhead on the top of the tank Add a 1/2" Banjo bulkhead or part numb...

3 Way Banjo bolted ball valve:  Side load with two mounts Polypropylene (use liquid Teflon, not Teflon tape when installing fittings) Do not use T...

       SCH 80 PVC 1/2" hose barb x 1/2" MPT male pipe thread heavy duty. This SCH 80 PVC hose barb is used commonly on the discharge side of a low ...

1/2" hose barb X 1/2" MPT 316 stainless steel          This is a high grade 316 stainless steel hose barb. We use these on our chemical applicatio...

1/2" Hose barb x 1/2" MPT elbow brass Many of the higher gpm pressure washers arrive with a 1/2"  bypass hose and require this barb at the tank Oft...

SCH 80 PVC 1" hose barb x 1/2" MPT male pipe thread heavy duty      This SCH 80 PVC hose barb is used commonly on the supply or suction side of a ...

SCH 80 PVC 3/4" hose barb x 3/4" MPT male pipe thread elbow heavy duty   SKU: HB1212.90

1/2" MPT x 1/4" FPT Brass Reducing Hex Bushing Low Pressure Use   SKU: 2082

Steel Hex Nipple 1/4 MPT, 5000 psi

SCH 80 PVC 3/4" hose barb x 3/4" MPT male pipe thread heavy duty SKU: HB1212.PVC  

Steel Hex Nipple 1/2" MPT, 5000 psi. Used to connect the ball valve to the 1/2" tee in a chemical bypass for a high GPM set-up. SKU: 2588

SCH 80 PVC 3/4" hose barb x 1/2" MPT male pipe thread heavy dutyCondition : New SKU: HB1208PVC