Drain Hose / Filter Hose Assembly 1" PVC Ball Valve 3' For 1.5" Y Strainer (No Filter)
A minimum of a 3' long (red, blue or yellow) 3/4" Flex Tech RT hose with two crimped PVC ends and a 1" grey PVC ball valve. Please leave a note at check out if you have a preference on color. If no note is left, we will choose the color for you.
The drain hose assembly installed into the top port of the bowl will allow you to clean out the filter without removing the bowl, clean your hands and fill a bucket with water.
This hose kit is included in the PL-8-TO and PL-8-TA kits.
Please don't forget to add the 1.5" hose barbs and the special 3/4" to 1.5" hose barb to help you properly plumb this filter. We created a plumbing diagram located at pressurewasherproducts.com to assist you with plumbing.
***Supply/suction hose inner diameter should be doubled compared to the pump inlet/suction port. For example, the TSF2021 has 3/4" inlets on located on either side of the bottom manifold of the pump. The pump should be supplied with 1 1/2" non-collapsible suction hose (AGC24).
SKU: JA-H24