5.5 GPM 3000 PSI Smokin' Hot Bandit Comet Pump Honda GX390
5.5 GPM 3000 PSI Smoking' Bandit Series Comet pump Honda GX390. Smoking' Bandit Series hot water pressure washer skid unit.
- Heavy duty powder coated frame.
- Top to bottom schedule 80 coil for maximum temperature rise.
- Corrosion resistant stainless steel coil wrap.
- Key start Honda engine.
- Must supply your own battery and battery box.
- Must supply your own bypass hose and bypass barb on the unloader.
- Belt driven Comet pump.
- Beckett burner.
- Stainless steel control panel with adjustable temperature control (keep it under 180 degrees).
We recommend that you plumb this unit to a minimum of a 100-gallon water tank or 275 gallon IBC tote.
Included with the skid:
- Gun/wand assembly with insulated wand and quick connects.
- 50' high pressure hose w/quick connects.
- Chemical injector assembly w/quick connects.
- 4 color-coded qc spray nozzles.
- 1 color-coded qc chemical nozzle.
We strongly recommend that you purchase our PL-4-TO or PL-4-TA kit which has almost everything you need to correctly plumb this unit. You will need to add a 1/2" hose barb (4784) and at least 12' or more of 3/8" yellow ag hose to plumb your bypass hose back to the tank (AGY06). Upsizing the hose ID's will allow you to shoot farther, increase the cleaning units and efficiency on your pressure washer as well as move much faster when using your surface cleaner.
Upsizing your hoses will prevent back-pressure to your pump, help your valves and high-pressure seals last longer, prevent your safety relief valve from spraying, supply enough water to your pump using the 'double your supply hose id in relation to your inlet port' rule and keep your pump cooler leading to less down time. Double check your surface cleaner hose to ensure that it is 3/8" ID instead of 1/4". Always use medium thread lock on your high-pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles.
Tired your pump going into bypass because another O-ring failed, and you need to replace the plug and/or coupler?
If using a chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold.
We recommend the Whisper Wash 16" Ultra (6717) for use with this 5.5 GPM hot skid. Using a larger diameter surface cleaner will cause the user to move more slowly than if using the 16" unit.
SKU: PW.BSH5530HC
