Slo Mo Sodium Hypochlorite Stable Softwash Surfactant 5 Gallons

       Slo Mo Softwash surfactant for sodium hypochlorite is 'The Original' ultra thick, super concentrated, non-hazardous, hydrophilic and very soapy. 

        We were the first ones to carry the Hang Tite and the first ones to carry the Slo Mo surfactant. We were the first ones to provide washers with SH stable fragrances.

       This is the thickest and most concentrated sodium hypochlorite stable Softwash surfactant available. We discovered that the average recipe would use less than a quarter as much regular surfactant such as Hang Tite or any of the others compared to using Slo Mo Softwash surfactant for SH. Those who rely on shipped surfactant will see a considerable savings using much less than a quarter of surfactant at a great price. 

       One 5-gallon bucket of Slo Mo Softwash surfactant takes the place of 3 - 8 5 gallon buckets of all the other surfactants.

       Mix ratio for mixing valves or proportioners:  Add 64 ounces to 5 gallons of water and stir to homogeneity. This is just a general guidelines and you can adjust for your desired ratio.

       Slo Mo is super thick and more gooey than honey which will drastically increase dwell time. It is easiest to handle in 5 gallon buckets. Add less than 1 ounce to 5 gallons of chemical when down streaming or x-jetting. Don't be surprised to see a foamy chemical when you apply the Slo Mo mixed into solution. However, when too much foam is seen, check the suction ports and suction lines on your pump. Air may be getting in through a crack, fitting or hole.

       Yes, you can use this with your chemical mixing valves or proportioning mixing valves. You may need to dilute the Slo Mo if you find that it is just too thick. You will be shocked at the savings. Instead of paying for 3 - 8 buckets of surfactant and a drop or two of scent, buy a 5 gallon bucket of Slo Mo and use a tiny amount of the "Original Surfactant".

       Using Slo Mo Softwash surfactant for sodium hypochlorite will enhance the properties of sodium hypochlorite by changing the way the SH works into the surface. Instead of running off, Slo Mo Softwash surfactant for SH, when mixed into solution with your SH, will break the surface tension of the shingles or tile, any roof surface, siding or horizontal surface to allow the product to permeate. In a 100-gallon recipe for shingle roof cleaning containing 30 gallons of sodium hypochlorite and 69.5 gallons of water, add less than 8 ounces of Slo Mo Softwash surfactant or 2 quarts of Hang Tite. Mix thoroughly. It is best to add the Slo Mo Softwash surfactant to the tank first, then add sodium hypochlorite and finally add the water to make a whirlpool. Driving to the site does not 'mix' the surfactants into a homogenous solution.

       The extremely positive and enthusiastic feedback keeps coming in!  Softwashers and pressure washers report the following:

"It sticks like glue."

"Adding Slo Mo to my mix is a game changer."

"Slo Mo is the bomb."

"It's the best stuff I’ve ever used."

"Rinses from windows clean without the white residue like those others."

       Thank you for your interest in our Slo Mo original sodium hypochlorite stable surfactant. We do not offer a smaller quantity of the Slo Mo. It is extremely thick and takes a while to process and prepare. This product has at least a two-year shelf life kept out of the freeze.

Please do not allow Slo Mo to freeze.  If it does, it can be brought back to life!

• Biodegradable
• Earth friendly, green wash additive
• Non-hazardous, ultra thick sodium hypochlorite-stable surfactant 
• Available in quantities up to 55-gallon drums shipped the best way including LTL freight.
• We save you the handling fee by boxing your order.
• Freight quotes are available by request.
• A SDS Sheet is not required for this non-hazardous product.  

SKU: SLOMO-5