10 gpm 3000 psi Skid Cold Pressure Washer Honda Engine TSF2421
10 gpm 3000 psi Skid Cold Pressure Washer ONLY Honda Engine TSF2421
10 gpm 3000 psi Honda IGX800 General Pump TSF2421 BX Belt drive, special powder coated steel frame and 1/2" green spring high volume pressure trapped unloader
Standard features
- Lifetime frame warranty on powder coated steel frame
- 3/8" Coupler installed on the outlet of 1/2" unloader (reduced)
- 1/2" Brass barb installed on the bypass outlet (Need bypass hose AGY08)
- High flow 1/2" ported YU21405 green spring unloader
- Engine and pump oil drains
- 20" L x 29" W x 20" H
- 178 Lbs
- Mounted on anti-vibration pads or hockey pucks
- Oil filter side exhaust
- Honda IGX800 Key Start Engine
- Safety relief valve
- 30W Non-Detergent oil for pump
- 10W30 oil for engine
- Oil prefilled in pump and engine.
We highly recommend adding:
The best high pressure 3/8" ball valve (6292.SMB) to this order to allow you to turn off the high pressure flow of water to switch from the gun to a Whisper Wash Ground Force surface cleaner. You need 4 x 3.0 orifice 25 degree nozzles for a four tip bar (1769) or 2 x 6.0 orifice 25 degree nozzles for a two tip bar (1118).
This unit will need 12.0 nozzles.
We carry everything you need to plumb this pressure washer in a kit which is part number, PL-8-TA for a horizontal leg tank or PL-8-TO for an IBC tote. You will need to add 10-15' of AGY08. The kits do not include the bypass hose.
Choose a 12.0 turbo nozzle for this pressure washer.
Install a high temperature Hudson float valve (Hudson-HT) using everything you need to install it into your water tank with our Hudson Installation Kit (HB). The Hudson installation kit installs into the very top of the tank using a bulkhead and barb to prevent the tank from over-flowing.
- Add a fuel tank
- Try a Lori Lift Kit and make your life easier! Lift your unit up.
- Need a gun, click here?
- Hose?
