SUTTNER

S.S. Sewer Nozzle 1/4 FPT #5.5 (.8mm Ori). SKU: 6355

S.S. Sewer Nozzle 1/8 FPT #5.5 (.8mm Ori). SKU: 6354

ST-49 Sewer Nozzle rotating 1/4" FPT 5.5 Rotating sewer nozzles are constructed physically small for cornering ability.  Backward ports drive the ...

ST-49 Sewer Nozzle rotating 1/8 FPT 5.5. SKU:  2372

Repair Kit for ST-457 5.5 Turbo Nozzle.  

ST-357 5.5 Turbo Nozzle 3600 PSI 190 degree. SKU: 4306

ST-456 5.5 Rotary Nozzle 5000 psi Specifications: 5000 psi maximum 200f. Maximum 1/4" inlet fitting Always use an inlet fitting with this nozzle. S...

ST-457 5.5 Turbo Nozzle 5800 psi 212 DEG turbo specifications: Maximum pressure: 5000 psi maximum flow: 12.0 GPM temperature: 200 degrees F. inlet:...

Repair Kit for ST-457 6.0 Turbo Nozzle. SKU: 4564  

ST-457 6.0 Turbo Nozzle 5800 psi 212 DEG  Add a 1627 male plug Specifications: Maximum pressure: 5000 psi Maximum flow: 12.0 GPM Temperature: 200 d...

ST-456 6.0 Rotary Nozzle 5000 psi Specifications: 5000 psi maximum 200 F. Maximum 1/4" inlet fitting Always use an inlet fitting with this nozzle. ...

ST-357 6.0 Turbo Nozzle 3600 PSI 190 degree. SKU: 4307

Suttner ST-36 sludge pump 6.5 kit.   The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. S...

Repair Kit for ST-457 7.0 Turbo Nozzle. SKU: 4566  

Suttner ST-36 sludge pump 7.0 kit.   The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. S...

ST457 7.0 Turbo Nozzle 5800 PSI 212 Degree Add a 1/4" male plug 

ST49 Sewer Nozzle Rotating 1/4" FPT 8.0 Orifice This nozzle will pull itself into the port. SKU:  2374

Repair Kit for ST-457 8.0 Turbo Nozzle. SKU: 4647  

Suttner ST-36 sludge pump 8.0 kit The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. Simp...

ST457 8.0 Turbo Nozzle 6000 psi 212 DEG  NOT for 8 gpm 3500 psi pressure washers.  Choose the 9.0 Turbo.  This is for the 8 gpm 4000 psi unit with...

Suttner ST-36 sludge pump 8.5 kit.   The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. S...

Repair Kit for ST-457 9.0 Turbo Nozzle SKU: 4657

ST457 9.0 Turbo Nozzle 6000 psi 212 DEG  Rated for 8 gpm 3500 psi Add a 1/4" male plug Turbo nozzles have been one of the most important accessori...

Complete switch assy for ST-261SThe microswitch is an STSP-NC A.C. Switch. Mounted in place of the bypass on the st-261 unloader, the switch allow...