19" Extreme Surface Cleaner Blue by Whisper Wash 2 Nozzle Hydro-Flow Spray Bar Stainless Ends
19" Extreme Surface Cleaner Blue by Whisper Wash 2 Nozzle Hydro-Flow Spray Bar Stainless Ends
The Whisper Wash Classic Extreme is rated from 2000-4000 psi, 4 - 10 GPM, 212 degrees maximum and 2500 rpm maximum. The cover is composed of heavy duty aluminum.
Please indicate the nozzle sizes you need or list the GPM and pressure of your pressure washer in the notes or your surface cleaner will not ship out. Thank you.
ATTENTION, PLEASE READ THE FOLLOWING:
Please choose appropriate nozzle orifices for your pressure and GPM. For example, a direct driven pressure washer with 4 GPM at 4000 psi will require two (2) 2.5 orifice by 25 degrees nozzles. A belt driven 4 GPM at 4000 psi pressure washer will require two (2) 2.5 orifice by 25 degrees nozzles. A belt driven 5.5 GPM at 3500 psi will require two (2) 3.0 by 25 degree nozzles. A belt driven 8 GPM at 3500 psi pressure washer will require two 4.5 orifice by 25 degree nozzles. Always refer to a nozzle chart or nozzle calculator when choosing nozzle orifices for your pressure washer or surface cleaner. Remember to divide your nozzle orifice by the number of holes on your spray bar.
When washing a delicate surface, do not adjust your unloader. Install nozzles in larger orifices to decrease the pressure. Never adjust the unloader unless you want to learn to repair or replace your pump/unloader early!
It is critical that your 8 GPM and higher pressure washer is plumbed using 1 1/2" suction hose and 1/2" jump hose to the reel and a 1/2" 50' high pressure hose for the first length on the reel. We have kits available for you to easily upsize your plumbing. All of the hose and fittings arrive in one box. You need to supply a heat gun, little bit of soap, liquid Teflon such as RectorSeal T Plus 2, tools for tightening the barbs and installing the hose fittings and water to run the equipment. Your pump/unloader and engine will run cooler and run under less stress, last longer, shoot farther using your gun/wand and surface clean faster. You will go home faster or on to the next job faster than plumbing your pump using the 1" hose. Your overall costs will go down and profit margin will increase.
The kits are available for tote connections: PL-8-TO
Horizontal leg tank connections: PL-8-TA
Keep it simple and remember to NEVER use Teflon tape (Use liquid threadlock #5004 instead).
