Classic 19" Surface Cleaner 4 Nozzle Bar 3/8" ID Hose
Whisper Wash surface cleaner with upsized 3/8" ID hose with 4 tip spray bar.
Operating parameters: 2000 psi - 4000 psi 2500 rpm at 4 - 10 GPM 212 deg. F maximum cover: 19" handle: 77" 20 lbs. 4 - 1/4"mpt stainless steel nozzles included four tip spray bar: PWP only recommends actually using a four tip bar if you are using 8+ GPM. Keep it simple. Buy the correct bar.
ATTENTION!!
Please indicate the nozzle sizes you need or list the GPM and pressure of your pressure washer in the notes or your surface cleaner will not ship out. Thank you.
Read More
When washing a delicate surface, Do NOT adjust your unloader. Install nozzles in larger orifices to decrease the pressure. Never adjust the unloader unless you want to learn to repair or replace your pump/unloader early!
Whisper Wash offers a full line of commercial grade surface cleaners and is located not far from us here on the west coast of Florida. Whisper Wash provides us with great pricing and we choose to pass the pricing on to you. They are an exceptional company to deal with regarding any questions or concerns that may arise. Whisper Wash offers a generous warranty for their products manufactured right here in the United States.
The Whisper Wash 19" Classic is now offered with the new, cartridge design swivel. Instead of taking your swivel to the local repair shop or using a hydraulic press to install the bearings, you can install the new cartridge in 10-15 minutes and get back to work. More often than not, the new swivels are green. The old style is silver or black.
Remember to find the serial number on your Whisper Wash unit and write it down in a safe place. It is located on the top portion of the swivel on the deck side. This will help you with any possible warranty questions and help the authorities locate and return your property in the event that it is stolen. The swivel or 'brains' of the unit is most often the biggest difference.
Less expensive units cannot successfully be rebuilt over and over such as the Whisper Wash units allow. The new swivels are often green in color and can be rebuilt very quickly in the field in 10-15 minutes. Surface cleaners of lesser value are offered with spray bars that look similar to pressure washer spray wands.
It is critical
That your 8 gpm and higher-pressure washer is plumbed using these suggested hose(s) below for the first length on the reel:
- 1 1/2" suction hose
- 1/2" jump hose to the reel
- 1/2" 50' high pressure hose
We have kits available for you to easily upsize your plumbing.
All of the hose and fittings arrive in one box. You need to supply a heat gun, little bit of soap, liquid Teflon such as Rectorseal T Plus 2, tools for tightening the barbs and installing the hose fittings and water to run the equipment.
Your pump/unloader and engine will run cooler and run under less stress, last longer, shoot farther using your gun/wand and surface clean faster. You will go home faster or on to the next job faster than plumbing your pump using the 1" hose. Your overall costs will go down and profit margin will increase.
Keep it simple and remember to never use Teflon tape use liquid threadlock (10 ml 5003) instead.
