Skip to content


Original price $4,725.00 - Original price $4,725.00
Original price
$4,725.00 - $4,725.00
Current price $4,725.00

Please order this unit by adding to the cart and choosing local pick up. We will ship to your address as listed using Estes Express. We ship to addresses only in the USA.

Must tighten belts after 30 days. No warranty on belts. unloader settings, clogged nozzles and loose belts are some causes of belt failure.



Extruded aluminum skid mounted cold 10 GPM 3500 PSI Bandit pressure washer B-K1035HCwith a pressure trapped blue spring unloader mounted remotely on an unloader block.

This unit offers a beefy base and a Honda igx800 fuel injected engine and Honda muffler. PSI offers a easy to access pump tensioner underneath the comet pump. The aluminum belt guard is assembled with heavy duty bolts instead of rivets.

10 GPM 3500 PSI Comet PS8010 banded belt extruded aluminum frame, high flow blue spring unloader remotely mounted on an unloader block to reduce stress on the manifold, gun/wand assembly with brass quick connects, 50' grey high pressure hose with HPC quick connects, 4 colored quick connect nozzles

34" x 18" x 22" 230 lbs


This unit will need a fuel tank, fuel hose and fittings (1184, 2119) to connect the fuel hose (fh) to the tank. You can purchase an aluminum fuel tank or poly fuel tank online or locally. We offer the fuel hose (fh) by the foot.

Please purchase a length of 3/8" (agy06) or 1/2" (agy08) yellow ag hose. We offer it by the foot.

Purchase two barbs for the bypass hose. You need a hose barb (1174) or (1171) for the outlet of the unloader and a 4784 or 4796 for the tank. The barb at the tank and bulkhead is included in the pl-8-to or pl-8-ta kit.

Purchase a battery for this unit. You will receive a small, empty battery box and strap.

If you need a nozzle holder, purchase it separately. You will receive 4 loose quick connect nozzles.

Purchase black soap nozzles (5422, 1776, 6641, 5287, 1720)

Unit arrives with coupler on the outlet and plug on the inlet of the gun. we recommend switching the plug and coupler.

We strongly recommend that you purchase our pl-8-to or pl-8-ta kit for a tote or a horizontal leg tank which has everything you need to correctly plumb this unit. We recommend switching out the 1" barb to 1.5", upsizing the non-collapsible suction hose to 1.5" ID, upsizing the filter to 80 mesh 1.5", installing a 1.5" bulkhead, brass hose barb and 1/2" bulkhead. increase the jump hose to the reel to a 1/2" high pressure hose and use a 50' hose as the first length of hose on the reel. (Always strip all hose from the reel except the last single wrap to protect the crimp when in use.) Upsizing the hose ID's will allow you to shoot farther, increase the cleaning units and efficiency of your pressure washer as well as move much faster when using your surface cleaner. The pl-8-to or pl-8-ta kit has everything you need to plumb the pressure washer as well as connect to a reel including the 50' high pressure hose.

Upsizing your hoses will prevent back-pressure to your pump, help your valves and high pressure seals last longer, prevent your safety relief valve from spraying water, help your pump run at a cooler temperature, supply enough water to your pump using the 'double your supply hose id in relation to your inlet port' rule and keep your pump cooler leading to less down time. double check your surface cleaner hose to ensure that it is 3/8" id instead of 1/4". 

Always use medium threadlock on your high pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles.

If using a chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold. Did you know you can use dual port chemical injector to apply chemical at an even stronger ratio? Try the gp100791. It has two barbs. Try one of our original slotted PVC filters (tf-di) with two barbs made especially for this dual ported chemical injector.

We recommend a minimum of 300 gallon water tank or IBC tote.

Add a high temperature Hudson float valve (hudson-ht) and Hudson float valve installation kit (hudson-a) to prevent over-filling your water tank. The Hudson float valve will automatically stop the flow into your tank when installed properly in the headspace of your water supply tank.


As with any pressure washer, do not adjust the unloader. The unloader is set at a spike pressure of 200 PSI above the operating pressure of the pump and meant to be left alone. If you need less pressure, change out the nozzles to a larger orifice and never smaller than what is called for using factory specifications using GPM and pressure. This unit requires a 10.0 orifice or larger nozzle.

Pair this unit with a 1/2" all-flo 17 GPM air diaphragm Softwash system for the most efficient cleaning rig. The 1/2" all-flo can be used to softwash everything from the roof to a giant commercial building and the 8 GPM pressure washer can be used to rinse using either the new m5ds adjustable nozzle or using a big 0050, 0060 or 2560 nozzle on a gun/wand assembly with low pressure.



Fast Shipping

Fast & Trackable Shipping

Give Us A Call

(727) 562-5488

Send Us An Email

Search for the products you're looking for.