Skip to content


Original price $8,578.00 - Original price $8,578.00
Original price
$8,578.00 - $8,578.00
Current price $8,578.00

10 GPM 3500 PSI Smokin' hot bandit comet pump Honda igx800 k7.3 unloader

8 weeks to 9 months lead on this unit.

Smokin' bandit series hot water pressure washer skid unit.



All hot units must ship on a pallet or freight ltl. Please add to the cart and choose local pick-up. We will ship freight to your house.

Heavy duty powder coated frame.

Top to bottom schedule 80 coil for maximum temperature rise.

Corrosion resistant stainless steel coil wrap.

12 gallon aluminum diesel and gasoline fuel tanks.

Key start Honda engine.

Must supply your own battery and battery box.

Must supply your own bypass hose and bypass barb on the unloader.

Belt driven comet pump with a 1 year 'bumper to bumper' warranty on the entire pump includes wear items.

Beckett burner

Stainless steel control panel with adjustable temperature control (keep it under 180 degrees)

4-groove"bandit" belt for uniform tension and maximum power transfer

EZ-line belt tension system

Easy access two price belt guard can be removed and installed

Easy pump and engine oil drains

Over pressure and thermal relief protection

We recommend that you plumb this unit to a minimum of a 200 gallon water tank or 275 gallon ibc tote,

Included with the skid:

Gun/wand assembly with insulated wand and quick connects

50′ high pressure hose w/quick connects

Chemical injector assembly w/quick connects

4 color-coded qc spray nozzles

1 color-coded qc chemical nozzle

We strongly recommend that you purchase our pl-8-to or pl-8-ta kit which has almost everything you need to correctly plumb this unit. You will need to add a 1/2" hose barb (2127) and at least 12' or more of 3/8" yellow ag hose to plumb your bypass hose back to the tank (agy06). upsizing the hose ID's will allow you to shoot farther, increase the cleaning units and efficiency on your pressure washer as well as move much faster when using your surface cleaner. The pl-8-ta or pl-8-to kit has (almost) everything you need to plumb the pressure washer as well as connect to a reel including the 50' high pressure hose.

Upsizing your hoses will prevent back-pressure to your pump, help your valves and high pressure seals last longer, prevent your safety relief valve from spraying, supply enough water to your pump using the 'double your supply hose ID in relation to your inlet port' rule and keep your pump cooler leading to less down time. Double check your surface cleaner hose to ensure that it is 3/8" id instead of 1/4". Always use medium threadlock on your high pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles.

If using an chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold.

We recommend the whisper wash 19" classic (4345), 24" ground force (6715), 24" lil' big guy or maybe the 28" big guy for use with this 8 GPM hot skid. Using a larger diameter surface cleaner will cause the user to move more slowly than if using the 19"-24" unit.

To order this unit, please call 727-562-5488 m-f 8-5 est. We ship to addresses in the USA.



Fast Shipping

Fast & Trackable Shipping

Give Us A Call

(727) 562-5488

Send Us An Email

Search for the products you're looking for.