19" Extreme Surface Cleaner Blue by Whisper Wash 4 Nozzle Hydro-Flow Spray Bar Stainless Ends
19" Extreme Surface Cleaner Blue by Whisper Wash 4 Nozzle Hydro-Flow Spray Bar Stainless Ends
The Whisper Wash Classic Extreme is rated from 2000-4000 psi, 4-10 GPM, 212 degrees maximum and 2500 rpm maximum. The cover is composed of heavy-duty aluminum.
ATTENTION PLEASE READ THE FOLLOWING:
Please indicate the nozzle sizes you need or list the GPM and pressure of your pressure washer in the notes or your surface cleaner will not ship out. Thank you.
Please choose appropriate nozzle orifices for your pressure and GPM. For example, a direct driven pressure washer with 4 GPM at 4000 psi will require two (2) 2.5 orifice by 25 degrees nozzles. A belt driven 4 GPM at 4000 psi pressure washer will require two (2) 2.0 orifice by 25 degrees nozzles. A belt driven 5.5 GPM at 3500 psi will require two (2) 3.0 by 25 degree nozzles. A belt driven 8 GPM at 3500 psi pressure washer will require two 4.5 orifice by 25 degree nozzles. Always refer to a nozzle chart or nozzle calculator when choosing nozzle orifices for your pressure washer or surface cleaner. Remember to divide your nozzle orifice by the number of holes on your spray bar.
READ MORE
Whisper Wash offers a full line of commercial grade surface cleaners and is located not far from us here on the West coast of Florida. Whisper Wash provides us with great pricing and we choose to pass the pricing on to you. They are an exceptional company to deal with regarding any questions or concerns that may arise. Whisper Wash offers a generous warranty for their products manufactured right here in the United States.
The Whisper Wash 19" Classic Extreme is now offered with the new, cartridge design swivel. Instead of taking your swivel to the local repair shop or using a hydraulic press to install the bearings, you can install the new cartridge in 10-15 minutes and get back to work. More often than not, the new swivels are green. The old style is silver or black. Remember to find the serial number on your Whisper Wash unit and write it down in a safe place. It is located on the top portion of the swivel on the deck side. This will help you with any possible warranty questions and help the authorities locate and return your property in the event that it is stolen. The swivel or 'brains' of the unit is most often the biggest difference. Less expensive units cannot successfully be rebuilt over and over such as the Whisper Wash units allow. The new swivels are often green in color and can be rebuilt very quickly in the field in 10-15 minutes.
It is critical that your 8 GPM and higher pressure washer is plumbed using 1 1/2" suction hose and 1/2" jump hose to the reel and a 1/2" 50' high pressure hose for the first length on the reel. We have kits available for you to easily upsize your plumbing. All of the hose and fittings arrive in one box. You need to supply a heat gun, little bit of soap, liquid Teflon such as RectorSeal T Plus 2, tools for tightening the barbs and installing the hose fittings and water to run the equipment. Your pump/unloader and engine will run cooler and run under less stress, last longer, shoot farther using your gun/wand and surface clean faster. You will go home faster or on to the next job faster than plumbing your pump using the 1" hose. Your overall costs will go down and profit margin will increase.
The kits are available for tote connections: PL-8-TO
Horizontal leg tank connections: PL-8-TA
Keep it simple and remember to never use Teflon tape, use medium threadlock (5003) instead.
