Skip to content


Original price $1,835.00 - Original price $1,835.00
Original price
$1,835.00 - $1,835.00
Current price $1,835.00

4 GPM 3500 psi portable cold bandit pressure washer.


4 weeks lead on this unit.


Please order this unit by calling 727-562-5488 or 800-519-9279 m-f 8a-5p est. we ship everywhere.


4 GPM 3500 psi Honda gx390 13 hp general pump ts1511 pump.


1 1/4" tubing operator handle and aluminum frame.


 50 mesh ss inlet filter.


External unloader and bypass.


Low oil shutdown.


13" tubed pneumatic tires.


Easy access two-piece belt guard.


3-groove 'bandit' belt for uniform tension and maximum power transfer.


43" x26" x 27" 144 lbs.


36" gun/wand assembly with quick connects, 50' high pressure grey hose with quick connects, 5 quick connect nozzles, high draw chemical injector assembly with quick connects.


We highly recommend adding the best high pressure 3/8" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a whisper wash ultra surface cleaner.


The 16" whisper wash ultra with the upgraded 3/8" high pressure hose is the perfect complement to this cold pressure washer.


If supplying with a garden hose from a property, use a 3/4" id garden hose. if supplying water from a tank, use 1" non-collapsible suction hose with a 1" y-strainer (ys16h). We have a 4 GPM plumbing kit for pressure washers that includes everything needed to plumb this unit to a tank (pl-4-ta or pl-4-ta).


Install a high temperature Hudson float valve (hudson-ht) using everything you need to install it with our Hudson assembly (hudson-a). The Hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing.


This unit is available in skid or portable cart for the same cost.


Inlet line size should be adequate to avoid starving the pump. • line size must be a minimum of one size larger than the pump inlet fitting. Avoid tees, 90-degree elbows or valves in the inlet line of the pump to reduce the risk of flow restriction and cavitation. • the line must be a flexible hose, not a rigid pipe, and reinforced on suction systems to avoid collapsing. • the simpler the inlet plumbing the less the potential for problems. keep the length to a minimum, the number of elbows and joints to a minimum (ideally no elbows) and the inlet accessories to a minimum. • use pipe sealant to assure air-tight, positive sealing pipe joints (

 SKU: PW.B4035HG

Fast Shipping

Fast & Trackable Shipping

Give Us A Call

(727) 562-5488

Send Us An Email

Search for the products you're looking for.