Skip to content

4328S TITAN ALUMINUM 28" FULL FRAME HOSE REEL STAINLESS MANI

Original price $455.00 - Original price $455.00
Original price
$455.00
$455.00 - $455.00
Current price $455.00

4 week - 6-month lead on this reel.

 

4328S full frame titan products manual hose reel with upgraded 1/2" FPT super swivel (8620a) w/ zerk fitting and 1/2" id stainless steel manifold suitable for pressure washing and corrosive chemicals. 

 

Please leave a note at checkout. If no note is left, we will send either swivel.

 

You need two reducing bushings (2578) and a street 45 (3361) plus a two-wire jump for this reel. If your pressure washer has a plug on the outlet, you need a 3/8" female coupler (2401 or 4630 ss), a 3/8" female plug (3878 or 4959 ss) and a 3/8" male coupler (3004 or 4960ss) to install the jump hose to this reel.

 

The 1/2" stainless steel manifold is connected to the the swivel and runs through the center of the reel and makes up the wetted components. As with most belongings in life, the better we take care of them, the longer they last. If you are trying to choose between the full frame titan hose reel and the u-channel series, consider the following: the lock is standard on this reel and all reels in the 4300 and full frame series except for the electric reels. 

 

The u-channel reels (4800 series) do not offer the hose reel lock in the standard build, but a bungee cord can be wrapped around the hose to prevent unravelling down the road. The full frame can handle a bit more abuse and pulling hose from the sides without 'tweaking' the reel. The full frame reels can be stacked easily, and the u-channel cannot. The u-channel can be more easily mounted on the side railing of an open trailer without requiring too much fabrication while the full frame reels require a bigger support footprint.

 

Capacity: holds 500' 1/2" id flex tech rt, kuri tek or yellow ag hose with crimped on stainless steel ends or 375' 5/8" id, flex tech rt, kuri tek or yellow ag hose with crimped on ss hose ends we can cut a jump hose to your exact length and crimp on the hose ends for both high pressure and low-pressure hose. A custom length of hose can be assembled in just about any hose we can get our hands on. We can offer a wide assortment of hose ends. We always recommend a two wire (r2) high pressure hose from your unloader on your pressure washer to the hose reel. 

 

Please leave a note at checkout. If no note is left, we will send either swivel.

 

This reel has the estimated capacity to hold the following hose inner diameter hose lengths: 500' of 1/2" and 375' of 5/8".

 SKU: TT4328S

 

Fast Shipping

Fast & Trackable Shipping

Give Us A Call

(727) 562-5488

Send Us An Email

sales@pressurewasherproducts.com

Search for the products you're looking for.