4806H Titan Aluminum 6" U-Channel Hose Reel 1/2” Steel Manifold
4806H U-Channel Titan Products manual hose reel with upgraded 1/2" FPT super swivel (5881) with Zerk fitting and 1/2" ID steel manifold suitable for pressure washing and non-corrosive chemicals.
You need two reducing bushings (2578) and a street 45- high pressure (3361) plus a two-wire jump for this reel.
If your pressure washer has a plug on the outlet, you need a 3/8" female socket (4630), a 3/8" female plug (4959) and a 3/8" male plug (4960) to install the jump hose to this reel.
The 1/2" steel manifold is connected to the swivel and runs through the center of the reel and makes up the wetted components. As with most belongings in life, the better we take care of them, the longer they last.
If you are trying to choose between the full frame Titan hose reel and the U-channel series, consider the following:
- The u-channel reels (4800 series) do not offer the hose reel lock in the standard build, but a bungee cord can be wrapped around the hose to prevent unravelling down the road.
- The lock is standard on all reels in the 4300, 5500, 4000 series and all the full frame series. The full frame can handle a bit more abuse and pulling hose from the sides without 'tweaking' the reel.
- The full frame reels can be stacked easily, and the u-channel cannot. The u-channel can be more easily mounted on the side railing of an open trailer without requiring too much fabrication while the full frame reels require a bigger support footprint.
Capacity:
Holds 200' 1/4", 150' 3/8", 100' 1/2" id Flex Tech RT, Kuri Tech or yellow AG-hose with crimped on stainless steel ends or 75' 5/8" id, Flex Tech RT, Kuri Tech or yellow AG-hose with crimped on stainless steel-hose ends we can cut a jump hose to your exact length and crimp on the hose ends for both high pressure and low-pressure hose.
A custom length of hose can be assembled in just about any hose we can get our hands on. We can offer a wide assortment of hose ends. We always recommend a two wire (R2) high pressure hose from your unloader on your pressure washer to the hose reel.
SKU: TT4806H