
5.2 gpm 3200 psi Pressure Washer Skid Mounted PULL START Cold Honda Comet Pump
5.2 gpm 3200 psi Pressure Washer Skid Mounted Cold Honda Comet Pump Pull Start
5.2 gpm 3200 psi Honda GX390 13 HP Comet pump V-belt, mesh inlet filter, commercial, external bypass EZ start unloader, low oil shutdown, thermal relief valve, 3' gun/wand assembly with quick connects, 50' high pressure hose with quick connects and red, yellow, white and black soap quick connect nozzles.
Must tighten belt if needed after a month. A clogged nozzle or nozzles that are sized too small for this unit will break the belt.
This unit should be supplied from a tank. Please add:
Highly recommend
Adding the best high pressure 3/8" ball valve (6292.SM) to this order to allow you to turn off the flow of water to switch from the gun to a Whisper Wash 16" Ultra surface cleaner (6717).
You will need 3.0 25-degree nozzles (1769) for your surface cleaner using this unit.
Install a high temperature Hudson float valve (Hudson-HT) using everything you need to install it with our Hudson assembly (Hudson-A or HB). The Hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing. Add a Kyle Davis shooter nozzle, SN4I and a 6540-4, a M5DS (7019 and a 5200 hex nipple to your order) for the ultimate reach.
Use a 6.0 turbo nozzle (4558 and 1627) for this unit.
- 30W Non-Detergent oil for pump
- 10W30 oil for engine
