Skip to content

5.5 gpm 3000 psi Key Start Skid Mounted Cold Bandit Pressure Washer

Original price $2,095.00 - Original price $2,095.00
Original price
$2,095.00
$2,095.00 - $2,095.00
Current price $2,095.00

5.5 gpm 3000 psi Key Start Skid Mounted Cold Bandit Pressure Washer


Strongly recommend adding the plumbing kit to this pressure washer. Add either the PL-4-TO for a tote connection or the PL-4-TA for a horizontal leg tank or regular tank. Remember to add a Hudson float valve (Hudson-HT) and a Hudson float assembly kit (Hudson-A or HB).

5.5 GPM 3000 psi Honda GX390 13 HP Comet RW5535S pump.

Aluminum frame

50 mesh SS inlet filter

External unloader and bypass

Low oil shutdown.

Easy access two-piece belt guard

43"L x 26" W x 27" H

3-groove 'Bandit' belt for uniform tension and maximum power transfer

Empty battery box is included. Please purchase a deep cycle marine battery locally.

36" gun/wand assembly with quick connects, 50' high pressure grey hose with quick connects, 5 quick connect nozzles, high draw chemical injector assembly with quick connects.

We highly recommend adding the best high pressure 3/8" ball valve (6292.SM) to this order to allow you to turn off the flow of water to switch from the gun to a whisper wash ultra surface cleaner (6717).  You will need 25-degree 3.5 orifice nozzles (1125) for your surface cleaner.

Choose the 6540-4 JROD & the Kyle Davis long range shooter nozzle (SN4I) for great results or add the 6540-5 and 15 and 20 orifice nozzles for lower range.

The 16" Whisper Wash Ultra is the perfect complement to this cold pressure washer because this is still a 13 hp engine powering this unit.

If supplying with a garden hose from a property, use a 3/4" ID garden hose. If supplying water from a tank, use 1" non-collapsible suction hose with a 1" Y-strainer (YS16H). We have a plumbing kit for pressure washers that includes everything needed to plumb this unit to a tank (PL-4-TA or PL-4-TO).

Install a high temperature Hudson float valve (Hudson-HT) using everything you need to install it with our Hudson assembly (Hudson-A or HB). The Hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing. 

Inlet line size should be adequate to avoid starving the pump.

  • Line size must be a minimum of one size larger than the pump inlet fitting. Avoid tees, 90-degree elbows or valves in the inlet line of the pump to reduce the risk of flow restriction and cavitation.
  • The line must be a flexible hose, not a rigid pipe, and reinforced on suction systems to avoid collapsing.
  • The simpler the inlet plumbing the less the potential for problems. Keep the length to a minimum, the number of elbows and joints to a minimum (ideally no elbows) and the inlet accessories to a minimum.
  • Use pipe sealant to assure air-tight, positive sealing pipe joints (http://www.catpumps.com/products/pdfs/993418b_ref_inlet%20condition%20check%20list_lor.pdf)

 SKU: PW.BK5530HCSE

Fast Shipping

Fast & Trackable Shipping

Give Us A Call

(727) 562-5488

Send Us An Email

sales@pressurewasherproducts.com

Search for the products you're looking for.