8 gpm 3500 psi Pressure Washer Comet Pump Skid Bandit Cold
Extruded aluminum skid mounted cold 8 GPM 3500 psi Bandit pressure washer-k8030hc with pressure trapped unloader.
Must inspect or tighten belts after 30 days.
***No warranty on belts***
Unloader settings, clogged nozzles and loose belts are some causes of belt failure.
Read more
This unit offers a beefy base and a Honda muffler. PSI offers an easy-to-access pump tensioner underneath the Comet pump. The aluminum belt guard is assembled with heavy-duty bolts instead of rivets.
8 GPM 3500 psi Honda GX690 with a 24 HP Honda brand muffler Comet TW8030S pump banded belt extruded aluminum frame, block mounted blue spring pressure trapped unloader, gun/wand assembly with brass hpc quick connects, 50' grey high-pressure hose with hpc quick connects, 5 colored quick connect nozzles.
- 34" x 18" x 22" high
- 210 LBS
Important!
This unit will need a fuel tank, 1/4" fuel hose, and fittings (1184, 2119) to connect the fuel hose (FH) to the tank. You can purchase an aluminum fuel tank or poly fuel tank online or locally. We offer the fuel hose (FH) by foot.
Please purchase a length of 3/8" (AGY06) or 1/2" (AGY08) yellow ag hose. We offer it on foot.
Purchase two barbs for the bypass hose. You need a hose barb (1174) or hose barb (1171) for the outlet of the unloader and a 4784 or 4796 for the tank. The barb at the tank and bulkhead is included in the PL-8-TO or PL-8-TA kit.
- Purchase a battery for this unit. You will receive a small, empty battery box and strap.
- If you need a nozzle holder, purchase it separately. You will receive 5 loose quick-connect nozzles.
Purchase a 6741 chemical injector and quick connects (3878, 2401), a length of 1/4" clear braided poly hose (2903) and a filter (TF-C) for this unit if you need an injector.
If you are tired of the pressure-trapped unloaders damaging everything under pressure when the trigger is released, choose the K7.3 model 8 GPM pressure washer. Pressure-trapped unloaders are notorious for leaving ping marks where the balls from the couplers meet on plug collars when laying on and off the gun repeatedly. The grooves result in damage to the O-rings inside the couplers. High-pressure hoses and high-pressure guns will last longer when using the flow-sensitive K7.3 unloader. You will stop fighting the stiff high-pressure hose when you switch to this unloader. Your body will stop taking the abuse. If you suffer from shoulder pain and tendonitis, this may be your ticket!
Always use medium thread lock (5003) on your high-pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles.
We recommend a minimum of a 200-gallon water tank or IBC tote.
Add a high-temperature Hudson float valve (Hudson-HT) and Hudson float valve installation kit (Hudson-A) or (HB) to prevent over-filling your water tank. The Hudson float valve will automatically stop the flow into your tank when installed properly in the headspace of your water supply tank.
