Skip to content


Original price $10,250.00 - Original price $10,250.00
Original price
$10,250.00 - $10,250.00
Current price $10,250.00

Alkota slim line hot skid pressure washer 8 GPM 4000 psi

To order this unit, please call 727-562-5488 m-f 8-5 est. We ship to addresses in the USA.

The current lead is 2 to 3 months on this unit.

22 1/4" w x 47 1/2" l x 41 1/8 h

Must tighten belts after 30 days. No warranty on belts. Unloader settings, clogged nozzles and loose belts are some causes of belt failure.

Did you know that you lose a minimum of 300 psi every 100' of 3/8" id high-pressure hose when using 8 GPM? Add the hose reel, any extra fittings under pressure, the gun/wand, and quick connects and you are down quite a bit of pressure.

We strongly recommend that you purchase our pl-8-to or pl-8-ta kit which has everything you need to correctly plumb this unit. We recommend switching out the 1" barb to 1.5", upsizing the non-collapsible suction hose to 1.5" id, upsizing the filter to 80 mesh 1.5", installing a 1.5" bulkhead, and upsizing to a 1/2" bypass hose to the tank using yellow ag, brass hose barb and 1/2" bulkhead. Increase the jump hose to the reel to a 1/2" high-pressure hose and use a 50' hose as the first length of hose on the reel. (Always strip all hose from the reel when in use.) Upsizing the hose IDs will allow you to shoot farther, increase the cleaning units and efficiency on your pressure washer as well, and move much faster when using your surface cleaner. The pl-8-to or pl-8-ta kit has everything you need to plumb the pressure washer as well as connect to a reel including the 50' high-pressure hose. 

Upsizing your hoses will prevent back-pressure to your pump, help your valves and high-pressure seals last longer, prevent your safety relief valve from spraying, and supply enough water to your pump using the 'double your supply hose ID in relation to your inlet port' plumbing rule of thumb and keep your pump cooler leading to less downtime. Double-check your surface cleaner hose to ensure that it is 3/8" id instead of 1/4". Always use medium thread lock on your high-pressure fittings instead of Teflon tape. Teflon tape will end up in the pump valves or clog nozzles. 

If using a chemical injector, install the injector only when in use and install it several feet downstream of the unloader to prevent back-siphoning into the unloader/pump manifold.

Electronic fuel injection 

18" coil with stainless steel wrapper

Onboard 7-gallon fuel tanks

The new Gx800 Honda V-twin engine offers higher horsepower, quiet operation, and greater fuel efficiency with a three-year warranty.

Yes, this unit is a key start and not a pull start.

Includes 12-volt battery and marine battery box.

Hour meter

Racor fuel filter

Sds - soft dampening system for the long life of the coil (accumulator) 

Built on an end frame. 

Belt-driven tsf2021 general pump

Pressure trapped blue spring ez start unloader: never adjust the unloader.

Arrives ready to use. Add fuel and connect to a minimum of 200 gallons water tank or IBC tote using a 1.5" non-collapsible suction hose and the hose barb that you will need to buy individually or in the pl-8-to or pl-8-ta kit which connects the 1.5" hose to the pump manifold in one fitting instead of 3. 

Standard accessories are included below: 

  • Gun/wand assembly with insulated grip and quick connects.
  • 50′ 1/2" id high-pressure hose w/quick connects.
  • Chemical injector assembly w/quick connects.
  • 1 yellow color-coded QC spray nozzle
  • 1 color-coded QC chemical nozzle 

Note: all units are completely factory assembled, tested in the USA, and delivered ready to operate 

To order this unit, please call 727-562-5488 m-f 8-5 est. We ship to addresses in the USA. We stock this unit.

We recommend the whisper wash 19" classic (4345), the 24" ground force (6715), the 24" lil big guy or maybe the 28" big guy for use with this 8 GPM hot skid. Some users report greater efficiency using a 4-nozzle spray bay. Using a larger diameter surface cleaner will cause the user to move more slowly than if using the 19"- 24" unit.

Add a high-pressure ball valve (6292.s) and a live gun swivel (6290) to save steps and prevent a fight with your hose.


Fast Shipping

Fast & Trackable Shipping

Give Us A Call

(727) 562-5488

Send Us An Email

Search for the products you're looking for.