JROD 4 Way Stainless Steel Nozzle Holder For 1/4 MEG Nozzles
JROD 4-way stainless steel nozzle holder for 1/4 MEG nozzles.
No more wet pockets or lost nozzles!
This handy tool will hold 4 of the 1/4" mpt MEG nozzles. Simply quick connect the JROD to your single lance. Insert the plug you wish to use. Nozzles sold separately.
If you do not need all four nozzles or need to carry three nozzles, try our Kyle Davis line of Nozzle Holders.
These nozzles holders are great for pressure washers. We recommend using nozzles installed in this holder to allow you to apply soap up high, rinse up high, use high pressure in a narrow and wider spray pattern.
Paired with 8 GPM @ 3500 psi, try out the following 1/4" MEG nozzles to apply soap or rinse like a fire hose: 0040, 0050, 0060, 0070, 0080, 0090.
To apply soap or rinse at low pressure with 8 GPM @ 3500 psi, try the following 1/4" meg nozzles: 1540, 2540, 4040, 6540, 1550, 2550, 4050, 6550, 1560, 2560, 4060, 6560 and larger.
To avoid needing to use an extension wand or ladder with your 8 GPM @ 3500 psi pressure washer to shoot far using a little pressure (Knocking down bee's nests) try the following 1/4" meg nozzles: 0012, 0015, 0515, 0020 and 0025.
To rinse off the sidewalk after using the surface cleaner with 8 GPM @ 3500 psi use a 2520, 2525 or 2530 1/4" MEG nozzle.
When trying to size nozzles appropriately for less gallons per minute, drop down several nozzle orifices from the nozzles listed above. Should you need assistance with choosing the nozzles, call or email us. We are happy to help you save time and money by choosing the correct nozzle for the job.
Never use a nozzle smaller than the nozzle chart selects for your gallons per minute and pressure. For example, 8 GPM @ 3500 psi requires an 8.5 orifice nozzle.
SKU: 6540
