8 AM to 4:30 PM, M-F | ¡Hablamos Español!
8 AM to 4:30 PM | M-F
¡Hablamos Español!
240 Volt 30A 1.89" FP Single Hole Mount Off Pump Burner Kraus Naimer CA20A312-600FT4 The cam (rotary) switch is used on pressure washers to con...
View full details1/2" Hose Barb x 3/8" MPT Brass Elbow SKU: 4795
1/2" MPT Burst Disc 7/16" Special Brass 6229 PSI at 250 Degree F SKU: RD-6502
5.5 gpm 3500 psi Comet Pump Skid Bandit Cold Pressure Washer Extruded aluminum skid mounted cold 5.5 GPM 3500 psi Bandit pressure washer BK5535HC ...
View full detailsSuttner ST-36 sludge pump 8.0 kit The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. Simp...
View full detailsSteel reducing bushing 1/2" MPT x 1/4" FPT, 5000 psi. Not many uses for this that we can think of. Before you purchase it, be sure you need it. SKU...
View full details1/2" ID x 25' 4000 psi grey or Black high pressure hose for 8 gpm and higher pressure washers R2 (Two wire hose). To move faster surface ...
View full details120 Volt 30 amp 1.89" FP single hole MT off-pump-burner Kraus Naimer CA20C34951-FT4 The Cam (rotary) switch is used on pressure washers to cont...
View full details1/2" MPT x 1/2" FPT SCH 80 PVC Street 90 Elbow
Want to get into the pressure washing business or upgrade to an 8 gpm pressure washer but don't know where to begin? If you have a trailer or truc...
View full detailsExtruded aluminum skid-mounted cold 8 GPM 4000 psi Bandit pressure washer with a pressure-trapped blue spring unloader mounted remotely on an unloa...
View full detailsSuttner ST-36 sludge pump kit. The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. Simply ...
View full details304 SS Hex Reducing bushing 1/2” mpt x 1/4” fpt 150 SKU: 5747
This is the favorite Softwash hose among roof wash professionals due to its light weight, crimped on hose ends (No hose clamps) and durabilit...
View full detailsST-8K 1/2 MPT adapter ST-8 float valve.
Brass Street Elbow 1/2" 90 degrees low pressure use. Choose a 5210 sweep 90 instead of this fitting as to lower the potential for bubbles entering ...
View full details3/8" Hose Barb x 1/2" MPT Male Pipe Thread Brass Hose Barb SKU: 1174
304 Stainless steel street sweep elbow 1/2" MPT x 1/2" FPT 150 PSI This fitting is the better choice for plumbing your pump inlet. SKU: 5210
Extruded aluminum skid mounted cold 8 GPM 3500 psi Bandit pressure washer BK8030HC with pressure trapped unloader. Must inspect or tighten belts a...
View full details12 gpm 3000 psi Pressure Washer Polychain Honda iGX800 AR Viper Pump Viper VA12G30S Pump Block mounted Green Spring Unloader with a 1/2" plug on t...
View full detailsHigh pressure 1/2 ball valve 304 stainless steel 6000 psi 1/2" FPT Although this valve is 304 stainless steel and rated to 6000 psi, we do not r...
View full details1/2" Hose barb x 1/2" MPT elbow brass Many of the higher gpm pressure washers arrive with a 1/2" bypass hose and require this barb at the tank Oft...
View full detailsPressure Washer Products is proud to offer the All-Flo 3/8" Kynar air diaphragm pump assembled in the United States of America for PWP for use spe...
View full detailsDo you want to upgrade from a smaller portable unit to a skid mounted unit? Add a 50 gallon tank or larger, 3/4" ID garden hose, fuel and water an...
View full details