Plumbing Fittings

This is an original slotted PVC filter approximately 1" x 8 - 12" long with a 1/4" poly hose barb. This original slotted PVC filter is suitable fo...

High pressure steel 45 degree street elbow 1/2" MPT x 1/2" FPT   We highly recommend this 1/2" 45 degree high pressure street elbow for your Titan...

3 - 6.5 GPM Pressure washer plumbing kit for a horizontal leg tank (any water tank with a flat wall) with everything needed to correctly plumb the...

Steel bushing 1/2" MPT x 3/8" FPT 5000 psi for high pressure use. SKU: 2578

       3 - 6.5 GPM pressure washer plumbing kit for IBC tote square tank with everything needed to correctly plumb the supply side of the pump fro...

       This is an original slotted PVC filter approximately 1" x 8"-12" long.  A 3/4" SCH 80 hose barb is included with the purchase. This origina...

       This is an original slotted PVC filter approximately 1" x 8-12" long.  A 1/2" SCH 80 hose barb is included with the purchase. This filter i...

3/4" MPT x 1 1/2" Hose Barb brass for pump inlet          This is a very difficult hose barb to find. This will allow you to correctly plumb your ...

       This is an original slotted PVC filter approximately 1" x  8-12" long with a 1" SCH 80 PVC hose barb.        This original slotted PVC filt...

Low Pressure Brass 45-degree Street Elbow 1/2" MPT x 1/2" FPT       We recommend using this street 45 on your Titan hose reel for your Soft wash s...

SCH 80 PVC 1.5" hose barb x 1.5" MPT male pipe thread heavy duty.         This SCH 80 PVC hose barb is used commonly on the supply or suction side ...

       1/2" FPT polypropylene bulkhead for tank pipe thread connection. This fitting is most often used near the top of the tank for the unloader b...

       8-12 GPM pressure washer plumbing kit for a horizontal leg tank or any tank (new hole) with everything needed to correctly plumb the supply...

304 stainless steel hex bushing 1/2" MPT x 3/8" FPT 150#   SKU: 5204

SCH 80 PVC 1" hose barb x 1" MPT male pipe thread heavy duty       This SCH 80 PVC hose barb is used commonly on the supply or suction side of a 3...

1/2" MPT x 1/4" FPT black polypropylene reducing bushing for your softwash gun or 1/2" ball valve applicator Condition : New   SKU: RB08-04

3/4" MPT x 1 1/2" hose barb brass for pump inlet      This is a very difficult hose barb to find. This will allow you to correctly plumb your 8 GP...

    8 - 12 GPM pressure washer plumbing kit for an IBC or square caged tank with everything needed to correctly plumb the supply side of the pump....

     Polypropylene Y-Strainer 1 1/2" FPT ports 316 Stainless Steel 80 mesh EPDM seal 150 PSI Maximum 11.5" x 8" with a minimum of a 3' long (Red, B...

3/4" FPT x 3/4” MPT 45 Degree Street Elbow Steel 4000 PSI High or Low Pressure Add a 3253 garden hose adapter. SKU: 5274

Steel Hex Coupler 3/8" FPT, 5000 PSI Great for connecting high pressure hoses without the need to worry about changing O-rings condition SKU: 2582

Brass 1" hose barb x 1/2" MPT male pipe thread heavy duty     This brass hose barb is used commonly on the supply or suction side at the pump mani...

Set of heavy duty mounts for side load Banjo ball valves composed of aluminum   These fit both the 3/4” and 1” valvesYou will receive two pieces o...

1.5" Bulkhead Banjo FPT Polypropylene For 1.5” FPT Tank Pipe Thread Connection   SKU: BH24