Plumbing Kits

3 - 6.5 GPM Pressure washer plumbing kit for a horizontal leg tank (any water tank with a flat wall) with everything needed to correctly plumb the...

       3 - 6.5 GPM pressure washer plumbing kit for IBC tote square tank with everything needed to correctly plumb the supply side of the pump fro...

Hudson Float Assembly Installation Kit for pressure washer tank set-up Must add the Hudson Float Valve to this kit   2 1/4" hole saw  This Hudso...

Hudson Float assembly installation kit for pressure washer tank set-up with 3/4" hose barb  Must add the Hudson float valve to this kit   2 1/4" ...

       8-12 GPM pressure washer plumbing kit for a horizontal leg tank or any tank (new hole) with everything needed to correctly plumb the supply...

    8 - 12 GPM pressure washer plumbing kit for an IBC or square caged tank with everything needed to correctly plumb the supply side of the pump....

Rubber Foot or Hockey Puck with Nut Bolt & Washer 2.5" x 1.75"  Need four, usually   SKU: 4542  

Conversion angle foot for cart to skid each (Need four usually). You will also need four 4542 pucks Condition : New   SKU: 1213

A Lori Lift Kit is used to raise your pressure washer to your drain oil, change your belts, install a new pump easily, and install a new unloader ...

Drain hose assembly w/ 3/4" grey PVC ball valve 3' long: Crimped on one end 1/2" MPT and the other 3/4" MPT in SCH 80 PVC The drain hose assembly ...

A minimum of a 3' long (red, blue or yellow) 3/4" Flex Tech RT hose with two crimped PVC ends and a 1" grey PVC ball valve. Please leave a note at...

Included in the kit are as follows:  1 x Connection for the outlet of the tank depending on your tank type Leg tanks use Bulkheads:  Choose the B...

J Bolt 5" or 7" Stainless Steel Lock Nut and Fender Washer for Tank Installation