10 gpm JROD Assembly for Pressure Washing High Low Soap Rinse 25 60 Orifices
JROD 4-Way stainless steel nozzle holder contains nozzles:
#0060, #2560, #0020, #2520 or any nozzle in that range for your 8 GPM pressure washer.
If you do not prefer the 25-degree spray pattern to rinse low or apply soap, simply state your preference for a different spray pattern in the checkout notes.
We strongly suggest adding a SN8I to this purchase. You can remove any of the nozzles and replace them with the Kyle Davis long-range nozzle and gain some serious distance.
We are happy to exchange a different spray pattern for the same price. Some guys prefer the 25 orifices on the smaller side. We carry those too. If you prefer the 25, let us know. These will not arrive installed.
Please use a medium or blue liquid thread lock (SKU#5003) to prevent cracking the JROD.
Simply quickly connect the JROD to your single lance. Insert the plug you wish to use.
When trying to size nozzles appropriately for fewer gallons per minute, drop down several nozzle orifices from the nozzles listed above. Should you need assistance with choosing the nozzles, call or email us. We are happy to help you save time and money by choosing the correct nozzle for the job.
These are the best guesses for both direct drive and belt-driven 10 GPM 3500 or 3000 psi pressure washers. You should reach more than four stories with the 0020 nozzle but not apply soap when your downstream injector is in line. The #0060 will allow you to generously apply soap to several stories. The #2520 should allow you to rinse without much pressure or soft wash pressure wash. The #2560 will allow you to apply a generous amount of soap using your downstream injector or use it to rinse by removing your injector. Of course, if you still pull the chemical and do not want to pull the chemical, remove the injector or use a 1/2” chemical injector bypass Bk08S.
SKU: 6540-10
